1. Home /
  2. Product finder

AVK METAL SEAT GATE VALVE, PN10/16

Duplex SS stem, alu-bronze seat, A4 bolts, alu-bronze wedge nut, 300µm FBE/2-pack coating

Sales Team - Contacts

Contact

Sales Team

Area sales Managers

Metal seat gate valve for neutral liquids like drinking water and treated waste water free from solids and fibrous impurities, max. 70°C. On DN<700 operation is either by manual handwheel/gearbox or by electric actuation; on DN≥700 operation is possible only via gearbox or actuator that is able to support the axial thrust loads.

AVK series 54 gate valves are designed with built-in safety and quality in every detail. The metal valve seat is resistant to high temperatures in the medium and will not deform during long periods of compression. This ensures stable and reliable operation over the long life span of the valve.

Variant 54/3132-007
Connection: Flanged
Material: Ductile iron
DN: DN350 - DN800
PN: PN 16
Closing direction: Clockwise to Close or Clockwise to Open

Features

  • High strength alu-bronze valve seat
  • Metal faces machined to a high finish for optimum contact and minimum leakage
  • Stem in high grade 1.4462 Duplex stainless steel
  • DN350-600 four separate and independent O-ring stem seals
  • DN≥700 stuffing box with ample depth gives long life to the PTFE packing
  • Round body-bonnet O-cord gasket fixed in a recess to avoid blow-out
  • Full bore
  • Lifting eyes for easy handling
  • All rubber and coating in contact with the water are drinking water approved
  • Fasteners in A4 stainless steel
  • DN 350-1000 protected by 300µm blue fusion bonded epoxy coating
  • DN≥1100 protected by 300µm blue 2-pack epoxy coating
  • Prepared for by-pass

Downloads

Datasheet
Appendix
Installation, operation and maintenance manuals

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm		 Operating
Direction		 Flange
drilling		 L
mm		 H1
mm		 H2
mm		 W
mm		 W1
mm		 F
mm		 F1
mm		 F2
mm		 Actuator
flange		 Theoretical
weight/kg
54-0350-31-0201200 350 CTC PN10 381 782 265 605 325 40 48 162 14 254
54-0350-31-1201200 350 CTC PN16 381 782 265 605 325 40 48 162 14 254
54-0400-31-0201200 400 CTC PN10 406 857 295 657 355 40 48 162 14 288
54-0400-31-1201200 400 CTC PN16 406 857 295 657 355 40 48 162 14 288
54-0450-31-0201200 450 CTC PN10 432 944 325 720 385 40 48 162 14 407
54-0450-31-1201200 450 CTC PN16 432 944 325 720 385 40 48 162 14 407
54-0500-31-0201200 500 CTC PN10 457 1017 365 790 425 40 48 162 14 516
54-0500-31-1201200 500 CTC PN16 457 1017 365 790 425 40 48 162 14 516
54-0600-31-1201200 600 CTC PN16 508 1178 440 905 485 40 48 162 14 633
54-0700-31-0201200 700 CTC PN10 610 1497 450 1050 421 - - 116 14 1416
54-0700-31-1201200 700 CTC PN16 610 1497 450 1050 421 - - 116 14 1416
54-0700-31-1202200 700 CTC PN16 610 1497 450 1050 421 - - 129 16 1416
54-0700-32-0201200 700 CTO PN10 610 1497 450 1050 421 - - 116 14 1416
54-0700-32-1201200 700 CTO PN16 610 1497 450 1050 421 - - 116 14 1416
54-0800-31-0201200 800 CTC PN10 660 1689 535 1160 495 - - 116 14 1766
54-0800-31-1201200 800 CTC PN16 660 1689 535 1160 495 - - 116 14 1766
54-0800-31-1203200 800 CTC PN16 660 1689 535 1160 495 - - 169 25 1766
54-0800-32-0201200 800 CTO PN10 660 1689 535 1160 495 - - 116 14 1766
54-0800-32-1201200 800 CTO PN16 660 1689 535 1160 495 - - 116 14 1766
2D/3D drawings
Enquiry
Scroll for more info

Components

1. Body Ductile iron GJS-500-7 (GGG-50)
2. Seat ring Alu-bronze CC331G (AB1)
3. Face ring Alu-bronze CC331G (AB1)
4. Wedge Ductile iron GJS-500-7 (GGG-50)
5. Wedge nut Alu-bronze CC333G (AB2)
6. Stem Stainless steel 1.4462, duplex
7. O-cord EPDM rubber
8. Bonnet Ductile iron GJS-500-7 (GGG-50)
9. Air plug Stainless steel
10. Key Steel
11. Bolts Stainless steel A4
12. Blanking plate Ductile iron GJS-500-7 (GGG-50)
13. O-ring EPDM rubber
14. Stem cap Ductile iron GJS-500-7 (GGG-50)
15. Seal Hot melt glue
16. Gland flange Ductile iron GJS-500-7 (GGG-50)
17. Thrust collar Alu-bronze CC331G (AB1)
18. Gland flange bolt Stainless steel A4
19. Seal Hot melt glue
20. Bonnet bolt Stainless steel A4
21. Thrust nut Alu-bronze CW307G
22. Distance piece Ductile iron GJS-500-7 (GGG-50)
23. Gland Ductile iron GJS-500-7 (GGG-50)
24. Packing PTFE
25. Stuffing box Ductile iron GJS-500-7 (GGG-50)

Test/Approvals

  • Hydraulic test according to EN 1074-1 and -2 / EN 12266

Standards

  • EN 1074 part 1 & 2
  • Flange drilling to EN1092, PN10/16
0 Files In the package